Monday, December 2, 2013

My Puff Quilt Tutorial


<a href="http://www.bloglovin.com/blog/11371563/?claim=ft84bynksbp">Follow my blog with Bloglovin</a>


Hello there!! So, a couple of weeks ago I posted a picture of the puff quilt that I finally completed for my almost five year old's firetruck and dalmatian bedroom on google. I actually had a few people comment that they would like a pattern for the quilt. I, however, do not have a pattern to share because I just kind of made this up as I went along. So, with that said, I thought that I would do yet another first and try a tutorial for how I made it. And, since I had some left over pillows and a rocking chair that I have just refinished, I am going to show you how I made the quilt on a very small scale....I am going to make a cushion for the rocking chair. The quilt can be made as big or small as you care to make it. The original quilt was made for a super twin bed and frankly, I used a super twin sheet as my guide and as the backing for it.

First things first....I feel that it is only fair that I put in a couple of disclaimers before I get started....
1. This is my first tutorial on my very new blog....so, please feel free to comment away and point me in the right direction!!
2. I have two small children, two dogs, a husband and a full time job....basically, my life is sometimes like watching the Three Stooges.....it took me a long time to get this quilt complete....longer than it really should have because of all the interruptions.....however, if I were to take all of the pockets of time that I dedicated to it, it probably really took me two weeks working full time....so, about 80 hours....which is a lot, and, there are probably easier and other ways of doing this, but, this is what worked for me and seemed easiest at the time.


OK...with that said, lets get started!!

I had nine total fabrics that I worked into the design of my puff quilt. I only bought one yard of the designer fabrics and two yards of the more inexpensive fabrics. I started out by cutting the fabrics into five inch squares. I also bought muslin for the backs of the pillows since I realized after doing a couple that the backside wouldn't be seen and the muslin was so inexpensive. The muslin was cut into four inch squares. I now know that if I had used a rotary cutter, this would have been a much easier task, however, being the novice that I am....I cut each and every square, row by row.....could have probably saved some time there.....(told you that I am learning!! :)
Here is the front and back of the pillow.



 After I had all of my pieces cut, I pinned the corners of the fabric and the muslin together and then made pleats (just folded over the excess) in the middle on three sides, leaving the last side open.



I then sewed the three sides together and stuffed the pillow with fluff. I used a lot of fluff....I want to say that I went through five bags of it....but, joannfabric.com always has coupons for when it wasn't already on sale....needless to say, I used a lot of coupons....

Here is one of the many bags of "fluff"

After stuffing the pillow with the fluff, I sewed the final side together creating the final pleat and now you have one pillow....you only have to do this about 399 more times, depending on the size of your puff quilt!! 
Now, I have to admit that I am one who gets bored looking at the same fabric, so, I kind of bounced around and sewed about 35 pillows of each fabric, separated them into boxes and then started putting them together. I would go back to making pillows when I started to run low, but, I just got bored making them which inevitably deterred me from my project....do it however it works for you.....

So, lets put these pillows together. Since they are all the same size, they line up quite easily. And, I did just that. I layed my pillows on the floor, made sure that I liked how the different fabrics lined up, made sure that there weren't two of the same fabrics touching each other or at least not directly in the same line and pinned them together. For the big quilt, my rows ended up being 15 pillows wide. For this cushion, it is only 6.


Here is the leftover pillows that I didn't use for the quilt....hence, the cushion :) But, yes, I had nine diaper boxes filled with little pillows at one point.

Now, that you have it pinned your first row together, go ahead and sew the individual puffs together one at a time so that you have created a row. 
Once I had completed one row, again, I would lay it on the floor and line up my next row, pin the pillows together and then sew them together.
When you have several rows sewn, you can start putting them together. With right sides together just match the centers and corners of each row and pin and sew.
The quilt did get very heavy after I had about ten rows sewn together. I learned quickly that it was easier to sew four or five rows together first, then attach it to the bigger piece. I fought it at first, but, it was certainly easier to do it in sections than to fight the weight....

Ok....so, you have your rows all sewn together.....now what?? I wondered that, too....I spent some time with a nice woman at the fabric store who had been quilting for a long time. She told me that I could use a fabric adhesive to baste the batting on instead of hand basting.....that sold me on this stuff!! And, it works just fine. It does get a bit gummy on your hands, but, washes off easily.
I cut the batting (they actually make batting for quilts in bedding sizes--I didn't know that--and since my boys bed is a super twin, I bought the full size batting and cut it down) to size and sprayed one foot sections at a time smoothing the batting over the quilt and making sure there weren't any air pockets. I did have to hit the corners again before adding the back to the piece.
Remember that I am using left overs for the cushion...thats why the batting is in two pieces here.
 With the batting secure, I cut the sheet to fit the length and width of the quilt. For this cushion, I just used a left over square of red fabric for the back. I used cotton quilt binding to attach the front to the back. In the picture below, I am using the satin blanket binding. It is your choice as to how you finish your quilt. I have to be honest, I have never done finish work before, and if there is anything that I would redo on my quilt (or cushion, for that matter) is the finish....I need a class as to how to make this a bit more professional looking. And, in my spare time (yeah, right!!) I will probably in all honesty redo the finish work on both of my pieces.



I certainly hope that you found this helpful. Like I said at the beginning, this is my first time doing a puff quilt (or any quilt for that matter) as well as a new blog and a new tutorial....Please feel free to comment and point me in the right direction, critique, and ask questions....I really welcome and appreciate the feedback!! 

Thanks for stopping by!!